Circulating cement mixers

Truck, trailer, skid mounted, or installed on your cement unit. This system is capable of mixing 14 bpm and densities up to 22 lbs./gal.

This system is equipped with all components necessary for a Circulating Cement Mixing (CCM) system. The CCM system is designed for use with pneumatically delivered dry cement.

The system is designed for the following operating performance:

Density Ranges: 6 to 22 lbs./gal.
Mixing Rates: 0 to 14 bpm

Mix water is supplied to the mixing chamber from either the fluid holding tanks or from external sources by a hydraulically driven 3” x 4” mix water centrifugal pump.

The CCM system uses a control valve educator system with an inlet where by cement is blown into the unit to produce highly consistent cement slurries.

The mixing chamber has the ability to recirculate slurry during periods of low mix rate operation or as a method of adjusting mixing energy and maintaining a uniform slurry.

The cement slurry exits the cement mixing chamber directly into a circulating cement mixing tub. It has an eight (8) bbl capacity mixing tub with two (2) compartments containing a hydraulic agitator with shaft and paddle in each compartment. Densitometer of choice available.

Loading pump, pressurizing pump, and recirculating pump will be mission sandmaster style centrifugal pumps.